Dual-mode optical thermometry based on Bi3+/Eu3+ co-activated BaGd2O4 phosphor with high sensitivity and signal discriminability

A series of BaGd₂O₄:Bi³⁺,Eu³⁺ phosphors with dual-emitting centers were prepared by high-temperature solid-state method. X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), fluorescence spectroscopy, lifetime decay curve and variable temperature emission spectroscopy were used to systematically study the structure, luminescence performance and temperature characteristics. Under ultraviolet (UV) excitation, the BaGd₂O₄:Bi³⁺,Eu³⁺ phosphor showed a broad-band emission in the blue region corresponding to transitions of Bi³⁺ ions and the sharp red light emission corresponding to Eu³⁺ ions. The Bi³⁺ and Eu³⁺ ion emission peaks were well-separated, which meets a prerequisite for efficient temperature signal resolution measurement. The fluorescence intensity ratio (FIR) technique was used to measure the different temperature response characteristics between Bi³⁺ blue emission and Eu³⁺ red emission. When the temperature varies from 293 K to 473 K, the relative temperature sensitivity (S_r) of BaGd₂O₄:Bi³⁺,Eu³⁺ phosphors is obtained, was determined as 1.0182%K⁻¹. In addition to calculating the relative sensitivity by FIR technology, we can also obtain the value of S_r through experiments and formulas related to the decay life, and found to be 1.0651%K⁻¹. Therefore, BaGd₂O₄: Bi³⁺,Eu³⁺ phosphor is an excellent non-contact optical temperature measurement material.     

Chemical Recycling of Carbon Fiber Reinforced Epoxy Composites Using Mild Conditions

The increased use of carbon fiber reinforced thermosets generates more waste and end-of-life products. However, an efficient recycling method for the expensive carbon fibers has not yet been developed. The selective decomposition of amine-cured epoxy resin under mild conditions is presented. A two-step method was investigated to decompose the epoxy resin. The optimum parameters were initially determined using a model compound. By analysis of the reaction products, a cleavage of the C–N bond according to the Cope elimination could be proven. Therefore, the Cope elimination is suggested as the main step of the decomposition of amine-cured epoxy resins in presence of hydrogen peroxide. By dissolving the resin, it is possible to recover resin-free fibers with unimpaired mechanical properties.     

虚实结合的可穿戴产品适合性检验研究

目的 为了更科学地研究和检验可穿戴产品的适合性,提出一种适合性检验方法,能够精确保留现实环境中的产品佩戴关系,并能将现实与虚拟的适合性检验研究相结合,得到合理的适合性检验结果.方法 以虚拟现实眼镜的适合性检验为例,通过高精度的三维测量技术将现实环境中的人、产品以及人—产品佩戴关系转化为三维虚拟信息,并以人—产品佩戴三维模型为参考基准对齐人和产品的虚拟模型,得到保留现实佩戴关系的人—产品佩戴模型组,再应用偏差分析法得出人—机佩戴区域的可视化适合性结果和统计数据,结合主观评价方法进一步分析产品的适合性.结论 虚实结合的产品适合性检验方法可在虚拟环境中高精度地保留现实环境中的人—产品佩戴关系,并能得到可视化的适合性检验结果,为检验和指导产品的适合性提供依据.     

532 nm laser damage and nonlinear absorption of Cr2O72− doped KDP crystals

Potassium dihydrogen phosphate (KDP) single crystals doped with a series of trace dichromate (Cr₂O₇^2?) were prepared using “point seed” technique. The IR spectra suggest that the KDP crystal network becomes compact with trace of Cr₂O₇^2? while the lattice of crystal also can be destroyed by excessive doping. The UV–Vis spectra show that the transmittance percentage is descended of the doped KDP crystals. Z-scan analysis demonstrates that with increasing of Cr₂O₇^2? concentration, a gradual raise has been observed for the nonlinear absorption coefficient (β). The laser-induced damage threshold (LIDT) at 532 nm of the KDP crystal doped with 3000 ppm Cr₂O₇^2? is found to be 28.29 J/cm² which is higher than that of pure one under the R-on-1 model. However, as the doping concentration continues to increase, the LIDT decreases significantly. The variation of photoluminescence (PL) results is also consisted with the trend of LIDT for the doped samples. The LIDT of pyramidal sample is higher than that of prismatic one with the same doping concentration. The results suggest that the laser damage of doped crystal may be due to a synergistic effect of the concentration of micro defects and nonlinear absorption.     

Applications of sketches in network traffic measurement: A survey

Accurate and timely network traffic measurement is essential for network status monitoring, network fault analysis, network intrusion detection, and network security management. With the rapid development of the network, massive network traffic brings severe challenges to network traffic measurement. However, existing measurement methods suffer from many limitations for effectively recording and accurately analyzing big-volume traffic. Recently, sketches, a family of probabilistic data structures that employ hashing technology for summarizing traffic data, have been widely used to solve these problems. However, current literature still lacks a thorough review on sketch-based traffic measurement methods to offer a comprehensive insight on how to apply sketches for fulfilling various traffic measurement tasks. In this paper, we provide a detailed and comprehensive review on the applications of sketches in network traffic measurement. To this end, we classify the network traffic measurement tasks into four categories based on the target of traffic measurement, namely cardinality estimation, flow size estimation, change anomaly detection, and persistent spreader identification. First, we briefly introduce these four types of traffic measurement tasks and discuss the advantages of applying sketches. Then, we propose a series of requirements with regard to the applications of sketches in network traffic measurement. After that, we perform a fine-grained classification for each sketch-based measurement category according to the technologies applied on sketches. During the review, we evaluate the performance, advantages and disadvantages of current sketch-based traffic measurement methods based on the proposed requirements. Through the thorough review, we gain a number of valuable implications that can guide us to choose and design proper traffic measurement methods based on sketches. We also review a number of general sketches that are highly expected in modern network systems to simultaneously perform multiple traffic measurement tasks and discuss their performance based on the proposed requirements. Finally, through our serious review, we summarize a number of open issues and identify several promising research directions.     

Experimental study on the deformation and failure mechanism of overburden rock during coal mining using a comprehensive intelligent sensing method

Understanding the spatiotemporal evolution of overburden deformation during coal mining is still a challenge in engineering practice due to the limitation of monitoring techniques. Taking the Yangliu Coal Mine as an example, a similarity model test was designed and conducted to investigate the deformation and failure mechanism of overlying rocks in this study. Distributed fiber optic sensing (DFOS), high-density electrical resistivity tomography (HD-ERT) and close-range photogrammetry (CRP) technologies were used in the test for comprehensive analyses. The combined use of the three methods facilitates the investigation of the spatiotemporal evolution characteristics of overburden deformation, showing that the mining-induced deformation of overburden strata was a dynamic evolution process. This process was accompanied by the formation, propagation, closure and redevelopment of separation cracks. Moreover, the key rock stratum with high strength and high-quality lithology played a crucial role in the whole process of overburden deformation. There were generally three failure modes of overburden rock layers, including bending and tension, overall shearing, and shearing and sliding. Shear failure often leads to overburden falling off in blocks, which poses a serious threat to mining safety. Therefore, real-time and accurate monitoring of overburden deformation is of great significance for the safe mining of underground coal seams.     

Development of ceramic fiber reinforced glass ceramic sealants for microtubular solid oxide fuel cells

Ceramic fibers in various forms with different fiber sizes are tested to improve the sealing performance of glass ceramic seals for microtubular solid oxide fuel cell applications. In this regard, several sealing pastes are prepared by mixing each ceramic fibers type with glass ceramics at 1.25 wt %. Five layered microtubular anode supported cells are also fabricated by extrusion and dip coating methods to evaluate the sealing performance of the composite sealants. The pastes are applied between the cells and gas manifolds made of Crofer22 APU. The electrochemical and sealing performances at an operating temperature of 800 °C under hydrogen are investigated after the glass forming process. Microstructures of the sealants are also examined by a scanning electron microscope. Experimental investigations reveal that the cells sealed by the pastes with ceramic bulk fiber and ceramic fiber rope gasket show acceptable open circuit potentials close to the theoretical one. These cells can be also pressurized up to around 150 kPa back pressure in the sealing performance tests. On the other hand, the pastes without any filler, with ceramic rope and with ceramic blanket exhibit poor sealing performance due to gas leakage originated from flowing of the main glass ceramic matrix from the joints. Therefore, ceramic bulk fiber and ceramic fiber rope gasket are found to behave as a stopper and can be used to prevent glass ceramics from flowing for microtubular solid oxide fuel cells or similar applications.     

Verification of unified effective stress theory based on the effect of moisture on mechanical properties of fiber reinforced unsaturated soil

The unified effective stress theory based on suction stress (SSCC theory) enables the characterization of soils under both saturated and unsaturated conditions with one closed-form relationship. This study provides experimental verification of this theory through the unconfined compressive strength test (UCS) and indirect tensile test strength (ITS) on silty clay soil stabilized with fiber. A series of matric suction, ITS, and UCS tests were conducted to validate the SSCC theory through the representation of the results of ITS and UCS tests in terms of mean total stress (p) versus deviatoric stress (q) and mean effective stress (p`) versus deviatoric stress (q). The results of the validation procedures showed that the SSCC theory is applicable and valid at a range of 6%–16% of water content on the silty clay and the silty clay fiber-reinforced soils. There is a small fluctuation in the increase of ITS and UCS values with increasing fiber content due to randomly oriented distribution of the fiber. The addition of glass fiber does not significantly affect the capacity of water retention of the soil. It improves the condition of the mechanical soil properties at the end of construction more than of the effective stress condition.     

2011～2020年华北平原气溶胶光学厚度时空分布特征及潜在源分析

随着经济高速增长和城市化进程不断加快,华北平原区域性空气污染问题愈演愈烈。针对该区域开展长时序气溶胶光学厚度时空分布特征和潜在源分析研究,对华北平原大气污染治理具有重要意义。基于长时序MODIS/Terra C6.1 MOD04_L2气溶胶光学厚度产品,分析华北平原气溶胶光学厚度的时空分布特征,并利用后向轨迹聚类分析讨论华北平原7个重点城市气团输送的季节变化,并以污染较为严重的河北石家庄为例进行潜在源分析和浓度权重分析,探究影响其大气质量的污染物潜在源区。结果表明:2011～2020年华北平原气溶胶光学厚度月均值呈显著的周期性变化,以年为周期,每个周期内峰值一般出现在6月至8月; 气溶胶光学厚度月际年内呈单峰分布,峰值出现在6月(0.75),最小值出现在12月(0.37); 气溶胶光学厚度季均值从大到小依次为夏季(0.67)、春季(0.59)、冬季(0.49)、秋季(0.46); 10年间气溶胶光学厚度呈下降趋势,整体下降幅度达36.84%,其中2011年最高(0.72),2018年最低(0.45); 华北平原7个重点城市春、夏、秋、冬四季主要受短距离气团输送影响较大,长距离气团输送影响较小; 2014～2020年河北石家庄的空气质量优良天数占比相对较小,空气质量状况差,影响其空气质量的污染物多为本地生成,同时也受周边省市近距离输送的影响。     

Particulate matter emitted from ultrasonic humidifiers—Chemical composition and implication to indoor air

Household humidification is widely practiced to combat dry indoor air. While the benefits of household humidification are widely perceived, its implications to the indoor air have not been critically appraised. In particular, ultrasonic humidifiers are known to generate fine particulate matter (PM). In this study, we first conducted laboratory experiments to investigate the size, quantity, and chemical composition of PM generated by an ultrasonic humidifier. The mass of PM generated showed a correlation with the total alkalinity of charge water, suggesting that CaCO₃ is likely making a major contribution to PM. Ion chromatography analysis revealed a large amount of SO₄²⁻ in PM, representing a previously unrecognized indoor source. Preliminary results of organic compounds being present in humidifier PM are also presented. A whole-house experiment was further conducted at an actual residential house, with five low-cost sensors (AirBeam) monitoring PM in real time. Operation of a single ultrasonic humidifier resulted in PM_2.5 concentrations up to hundreds of μg m⁻³, and its influence extended across the entire household. The transport and loss of PM_2.5 depended on the rate of air circulation and ventilation. This study emphasizes the need to further investigate the impact of humidifier operation, both on human health and on the indoor atmospheric chemistry, for example, partitioning of acidic and basic compounds.